CLECO S10555

AX M6N-08-8M-3

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.076 lb

• Magnetism: Magnetic

• Overall Length: 76.0 mm
• Set: No
• Size: 8 mm

AX M-7MME1

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• MR-7mmE1 has stronger magnet

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• MR-7mmE1 has stronger magnet

• Weight: 0.034 lb
• Diameter Drive End (C): 12.7 mm
• Diameter Nose End (B): 11.1 mm

• Hex Opening: 7 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 4.8 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 22.2 mm
• Set: No

AX M-835

• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.206 lb
• Description: For 5/16" hex inserts, magnetic

• Magnetism: Magnetic

• Overall Length: 2.75 in, 70.0 mm
• Set: No

AX M-858

• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.236 lb
• Description: For 1/4" hex inserts, magnetic

• Female Hex Size (in): 1/4 in

• Long Description: For 1/4" hex inserts, magnetic
• Magnetism: Magnetic

• Overall Length: 2.75 in, 70.0 mm
• Set: No

AX M-8MM11

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.038 lb
• Diameter Drive End (C): 12.7 mm
• Diameter Nose End (B): 12.7 mm

• Hex Opening: 8 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 4.8 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 25.4 mm
• Set: No

AX M-8MM21

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.067 lb
• Diameter Drive End (C): 12.7 mm
• Diameter Nose End (B): 12.7 mm

• Hex Opening: 8 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 4.8 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 44.4 mm
• Set: No

AX MB-1208

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Weight: 0.067 lb
• Diameter Drive End (C): 1/2 in
• Diameter Nose End (B): 3/8 in

• Hex Opening: 1/4 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 5/32 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1-3/4 in
• Set: No

AX MB-1210

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Weight: 0.067 lb
• Diameter Drive End (C): 1/2 in
• Diameter Nose End (B): 1/2 in

• Hex Opening: 5/16 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 3/16 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1-3/4 in
• Set: No

AX MB-1211

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Weight: 0.085 lb
• Diameter Drive End (C): 9/16 in
• Diameter Nose End (B): 9/16 in

• Hex Opening: 11/32 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 3/16 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1-3/4 in
• Set: No

AX MB-1212

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Weight: 0.084 lb
• Diameter Drive End (C): 9/16 in
• Diameter Nose End (B): 9/16 in

• Hex Opening: 3/8 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 1/4 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1-3/4 in
• Set: No

AX MB-12MM23

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Weight: 0.174 lb
• Diameter Drive End (C): 19.1 mm
• Diameter Nose End (B): 19.1 mm

• Hex Opening: 12 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 7.2 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 50.8 mm
• Set: No

AX MB-1312

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Weight: 0.045 lb
• Diameter Drive End (C): 9/16 in
• Diameter Nose End (B): 9/16 in

• Hex Opening: 3/8 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 1/4 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 3 in
• Set: No

AX MB-13MM23

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Weight: 0.197 lb
• Diameter Drive End (C): 20.6 mm
• Diameter Nose End (B): 20.6 mm

• Hex Opening: 13 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 8.7 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 50.8 mm
• Set: No

AX MB-17MM23

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Weight: 0.305 lb
• Diameter Drive End (C): 25.4 mm
• Diameter Nose End (B): 25.4 mm

• Hex Opening: 17 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 50.8 mm
• Set: No

AX MB-3212

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Weight: 0.176 lb
• Diameter Drive End (C): 3/4 in
• Diameter Nose End (B): 19/32 in

• Hex Opening: 3/8 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 1/4 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 2 in
• Set: No

AX MB-3216

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Weight: 0.197 lb
• Diameter Drive End (C): 13/16 in
• Diameter Nose End (B): 13/16 in

• Hex Opening: 1/2 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 11/32 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 2 in
• Set: No

AX MB-8MM21

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.069 lb
• Diameter Drive End (C): 12.7 mm
• Diameter Nose End (B): 12.7 mm

• Hex Opening: 8 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 4.8 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 44.4 mm
• Set: No

AX MDA-08

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.041 lb
• Description: Magnetic

• Magnetism: Magnetic

• Overall Length: 1.75 in
• Set: No
• Size: 1/4 in

AX MDA-10MM

AX MDA-7MM

AX MDA-8MM

AX MDB-12

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.076 lb
• Description: Magnetic

• In Column Note 2: 5/16" Shank Diameter
• Magnetism: Magnetic

• Overall Length: 2.56 in
• Set: No
• Size: 3/8 in

AX MET-1401C

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.002 lb

• Drive: 1/2" Square

• Set: No

AX MET-1402C

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.098 lb

• Drive: 1/2" Square

• Set: No

AX MET-1600C

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.004 lb

• Drive: 3/4" Square

• Set: No

AX MF-25-B

• Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

• Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

• Weight: 0.066 lb

• Female Square (in): 1/4 in

• Largest Diameter: 5/8 in, 16 mm
• Male Square Drive (in): 1/4 in

• Overall Length: 1.625 in, 41.0 mm
• Set: No

AX MF-37

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.156 lb

• Female Square (in): 3/8 in

• Largest Diameter: 3/4 in, 19 mm
• Male Square Drive (in): 3/8 in

• Overall Length: 2.125 in, 54.0 mm
• Set: No

AX MF-37-B

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.157 lb

• Female Square (in): 3/8 in

• Largest Diameter: 3/4 in, 19 mm
• Male Square Drive (in): 3/8 in

• Overall Length: 2.125 in, 54.0 mm
• Set: No

AX MF-39

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
• Maximum operating angle is30 degrees.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
• Maximum operating angle is30 degrees.

• Weight: 0.012 lb

• Female Square (in): 1/2 in

• Largest Diameter: 7/8 in, 22 mm
• Male Square Drive (in): 3/8 in

• Overall Length: 2.56 in, 65.0 mm
• Set: No

AX MF-50-B

AX MHM-1710-4

• Weight: 0.068 lb
• Description: Magnetic

• Magnetism: Magnetic

• Overall Length: 4.0 in
• Set: No
• Size: 5/16 in

AX MTX-1110

AX MTX-3414

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Some Torx sockets have a DIN (pin and o-ring) groove.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Some Torx sockets have a DIN (pin and o-ring) groove.

• Weight: 0.037 lb
• Diameter Drive End (C): 3/4 in, 19 mm
• Diameter Nose End (B): 5/8 in, 16 mm

• Driver Size: E-14

• Magnetism: Magnetic

• Opening Modifier: Torx

• Overall Length A: 1-1/4 in, 32 mm
• Set: No

AX NC-5130

AX P-1414

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.063 lb

• Fastener Type: Square

• Male Square Drive (in): 7/16 in

• Overall Length: 1.25 in, 32.0 mm
• Set: No

AX P-320X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
• Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
• Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

• Weight: 0.108 lb
• Body Diameter: .290 in, 7.37 mm

• Drive: Hex Power Drive
• Fastener Type: Slotted

• Screw Size: 8F-10R
• Set: No

AX QR-314

• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.210 lb

• Hex Open. (A): 7/16 in
• Magnetism: Non-Magnetic

• Opening Depth (F): 1-3/32 in, 28 mm

• Set: No
• Sleeve Diameter (E): 1-1/4 in, 32 mm

AX QR-M-490-A

• Weight: 0.092 lb
• Description: Magnetic, quick release

• Magnetism: Magnetic

• Overall Length: 2.9 in, 74.0 mm
• Set: No

AX QR-M-490-A6

• Weight: 0.160 lb
• Description: Magnetic, quick release

• Magnetism: Magnetic

• Overall Length: 6.0 in, 152.0 mm
• Set: No

AX R-320X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
• Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
• Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

• Weight: 0.138 lb
• Body Diameter: .350 in, 8.89 mm

• Drive: Hex Power Drive
• Fastener Type: Slotted

• Screw Size: 10F-12R
• Set: No

AX RP-314

AX RP-514

AX SA-122-D

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.140 lb
• Clearance Depth (E): 3/8 in
• Diameter Nose End (D): 9/16 in

• Hex Opening: 3/8 in
• Magnetism: Non-Magnetic

• Opening Modifier: Double Hex

• Overall Length A: 1-57/64 in
• Set: No

AX SA-221

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.255 lb
• Clearance Depth (E): 19/32 in
• Diameter Nose End (D): 7/8 in

• Hex Opening: 5/8 in

• Overall Length A: 2-27/64 in
• Set: No

AX SA-28

• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.054 lb
• Clearance Depth (E): 7/16 in
• Diameter Nose End (D): 17/32 in

• Hex Opening: 3/8 in
• Magnetism: Non-Magnetic

• Opening Modifier: 6 Point Hex

• Overall Length A: 1-19/32 in
• Set: No

AX SA-322

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.345 lb
• Clearance Depth (E): 11/16 in
• Diameter Nose End (D): 1-1/8 in

• Hex Opening: 3/4 in

• Overall Length A: 2-37/64 in
• Set: No

AX SA-510-22M

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

• Weight: 0.019 lb
• Clearance Depth (E): 16.3 mm
• Diameter Nose End (D): 31.8 mm

• Hex Opening: 22 mm

• Overall Length A: 73 mm
• Set: No

AX SA-58-18M

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.319 lb
• Clearance Depth (E): 17.5 mm
• Diameter Nose End (D): 25.4 mm

• Hex Opening: 18 mm

• Overall Length A: 66 mm
• Set: No

AX SA-C-36-10M

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.020 lb
• Clearance Depth (E): 9.5 mm
• Diameter Nose End (D): 15.1 mm

• Hex Opening: 10 mm

• Overall Length A: 48 mm
• Set: No

AX SA-C-37-13M

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

• Weight: 0.179 lb
• Clearance Depth (E): 11.9 mm
• Diameter Nose End (D): 17.5 mm

• Hex Opening: 13 mm

• Overall Length A: 52 mm
• Set: No

AX SD-2052-10

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.163 lb

• Drive: Hex Power Drive
• Fastener Type: Phillips

• Overall Length: 10.0 in, 254.0 mm
• Point Size: 2
• Set: No

AX SF-10MM11

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.054 lb
• Diameter Drive End (C): 15.9 mm
• Diameter Nose End (B): 15.9 mm

• Hex Opening: 10 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 6.4 mm
• Opening Modifier: Surface Drive

• Overall Length A: 25.4 mm
• Set: No

AX SF-13MM43

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Weight: 0.100 lb
• Diameter Drive End (C): 19.1 mm
• Diameter Nose End (B): 19.1 mm

• Hex Opening: 13 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 8.7 mm
• Opening Modifier: Surface Drive

• Overall Length A: 38.1 mm
• Set: No

AX SF-15MM35

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.380 lb
• Diameter Drive End (C): 23.8 mm
• Diameter Nose End (B): 23.8 mm

• Hex Opening: 15 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: Surface Drive

• Overall Length A: 82.5 mm
• Set: No

AX SF-14MM15

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.159 lb
• Diameter Drive End (C): 23.8 mm
• Diameter Nose End (B): 22.2 mm

• Hex Opening: 14 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: Surface Drive

• Overall Length A: 38.1 mm
• Set: No

AX SF-16MM15

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.192 lb
• Diameter Drive End (C): 25.4 mm
• Diameter Nose End (B): 25.4 mm

• Hex Opening: 16 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: Surface Drive

• Overall Length A: 38.1 mm
• Set: No

AX SF-16MM35

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.433 lb
• Diameter Drive End (C): 25.4 mm
• Diameter Nose End (B): 25.4 mm

• Hex Opening: 16 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: Surface Drive

• Overall Length A: 82.5 mm
• Set: No

AX SF-17MM15

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.257 lb
• Diameter Drive End (C): 28.6 mm
• Diameter Nose End (B): 28.6 mm

• Hex Opening: 17 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: Surface Drive

• Overall Length A: 38.1 mm
• Set: No

AX SF-17MM45

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.138 lb
• Diameter Drive End (C): 23.8 mm
• Diameter Nose End (B): 23.8 mm

• Hex Opening: 17 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: Surface Drive

• Overall Length A: 38.1 mm
• Set: No

AX SF-24MM25

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.539 lb
• Diameter Drive End (C): 34.9 mm
• Diameter Nose End (B): 34.9 mm

• Hex Opening: 24 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 15.9 mm
• Opening Modifier: Surface Drive

• Overall Length A: 57.1 mm
• Set: No

AX SF-3012

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.026 lb
• Diameter Drive End (C): 3/4 in
• Diameter Nose End (B): 19/32 in

• Hex Opening: 3/8 in
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 3/16 in
• Opening Modifier: Surface Drive

• Overall Length A: 7/8 in
• Set: No

AX SF-3214

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.143 lb
• Diameter Drive End (C): 3/4 in
• Diameter Nose End (B): 11/16 in

• Hex Opening: 7/16 in
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 9/32 in
• Opening Modifier: Surface Drive

• Overall Length A: 2 in
• Set: No

AX SF-5126

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.313 lb
• Diameter Drive End (C): 1-1/4 in
• Diameter Nose End (B): 1-1/4 in

• Hex Opening: 13/16 in
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 17/32 in
• Opening Modifier: Surface Drive

• Overall Length A: 1-1/2 in
• Set: No

AX SF-5518

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.302 lb
• Diameter Drive End (C): 15/16 in
• Diameter Nose End (B): 13/16 in

• Hex Opening: 9/16 in
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 7/16 in
• Opening Modifier: Surface Drive

• Overall Length A: 3-1/4 in
• Set: No

AX SF-8MM13

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.085 lb
• Diameter Drive End (C): 19.1 mm
• Diameter Nose End (B): 12.7 mm

• Hex Opening: 8 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 4.8 mm
• Opening Modifier: Surface Drive

• Overall Length A: 31.7 mm
• Set: No

AX SW-911-P

AX SZ-10

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.137 lb

• Fastener Type: Socket Head

• Hex Size: 1/8 in
• Length of Insert: 1.375 in, 35mm

• Overall Length: 2.25 in, 57.0 mm
• Set: No

AX SZ-11

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.139 lb

• Fastener Type: Socket Head

• Hex Size: 5/32 in
• Length of Insert: 1.375 in, 35mm

• Overall Length: 2.25 in, 57.0 mm
• Set: No

AX SZ-11-A

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.032 lb

• Fastener Type: Socket Head

• Overall Length: 1.375 in, 35.0 mm
• Set: No

AX SZ-12

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.139 lb

• Fastener Type: Socket Head

• Hex Size: 3/16 in
• Length of Insert: 1.375 in, 35mm

• Overall Length: 2.25 in, 57.0 mm
• Set: No

AX SZ-13

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.146 lb

• Fastener Type: Socket Head

• Hex Size: 7/32 in
• Length of Insert: 1.375 in, 35mm

• Overall Length: 2.25 in, 57.0 mm
• Set: No

AX SZ-14

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.144 lb

• Fastener Type: Socket Head

• Hex Size: 1/4 in
• Length of Insert: 1.375 in, 35mm

• Overall Length: 2.25 in, 57.0 mm
• Set: No

AX SZ-14-A

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.039 lb

• Fastener Type: Socket Head

• Overall Length: 1.375 in, 35.0 mm
• Set: No

AX SZ-16-A

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.054 lb

• Fastener Type: Socket Head

• Overall Length: 1.375 in, 35.0 mm
• Set: No

AX SZ-17-A

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.075 lb

• Fastener Type: Socket Head

• Overall Length: 1.375 in, 35.0 mm
• Set: No

AX SZ-20

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Adapters with an "SC" prefix feature a set screw for locking in the bit. An "RP" prefix indicates adapters with a thru hole for a spring pin.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Adapters with an "SC" prefix feature a set screw for locking in the bit. An "RP" prefix indicates adapters with a thru hole for a spring pin.

• Weight: 0.241 lb

• Fastener Type: Socket Head

• Overall Length: 2.5 in, 64.0 mm
• Set: No

AX SZ-22

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Adapters with an "SC" prefix feature a set screw for locking in the bit. An "RP" prefix indicates adapters with a thru hole for a spring pin.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Adapters with an "SC" prefix feature a set screw for locking in the bit. An "RP" prefix indicates adapters with a thru hole for a spring pin.

• Weight: 0.245 lb

• Fastener Type: Socket Head

• Overall Length: 2.5 in, 64.0 mm
• Set: No

AX SZ-23

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Adapters with an "SC" prefix feature a set screw for locking in the bit. An "RP" prefix indicates adapters with a thru hole for a spring pin.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Adapters with an "SC" prefix feature a set screw for locking in the bit. An "RP" prefix indicates adapters with a thru hole for a spring pin.

• Weight: 0.252 lb

• Fastener Type: Socket Head

• Overall Length: 2.5 in, 64.0 mm
• Set: No

AX SZ-25

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Adapters with an "SC" prefix feature a set screw for locking in the bit. An "RP" prefix indicates adapters with a thru hole for a spring pin.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Adapters with an "SC" prefix feature a set screw for locking in the bit. An "RP" prefix indicates adapters with a thru hole for a spring pin.

• Weight: 0.284 lb

• Fastener Type: Socket Head

• Overall Length: 2.5 in, 64.0 mm
• Set: No

AX SZ-3-7-10MM

• Weight: 0.163 lb

• Fastener Type: Socket Head

• Overall Length: 2.25 in, 57.0 mm
• Set: No

AX SZ-3-7-4MM

• Weight: 0.139 lb

• Fastener Type: Socket Head

• Overall Length: 2.25 in, 57.0 mm
• Set: No

AX SZ-3-7-8MM

• Weight: 0.152 lb

• Fastener Type: Socket Head

• Overall Length: 2.25 in, 57.0 mm
• Set: No

AX SZ-5-10-14MM

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.074 lb
• Bit Length (A): 29/32 in, 23 mm

• Fastener Type: Socket Head

• Hex Size: 14 mm

• Overall Length: 2.5 in, 63.0 mm
• Set: No

AX SZ-5-10-17MM

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.429 lb
• Bit Length (A): 29/32 in, 23 mm

• Fastener Type: Socket Head

• Hex Size: 17 mm

• Overall Length: 2.5 in, 63.0 mm
• Set: No

AX SZ-5-7-5MM

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.242 lb
• Bit Length (A): 7/8 in, 22 mm

• Fastener Type: Socket Head

• Hex Size: 5 mm

• Overall Length: 2.5 in, 63.0 mm
• Set: No

AX SZ-7-10MM

AX SZ-7-14MM

AX SZ-7-3MM

AX TWD-3

• Tri-Wing is a registered trademark of the Phillips Screw Company.

• Tri-Wing is a registered trademark of the Phillips Screw Company.

• Weight: 0.013 lb

• Drive: Hex Insert
• Fastener Type: Tri-Wing

• Overall Length: 1.0 in, 25.0 mm
• Recess Size: 3
• Screw Size Shear Head: 8-32
• Screw Size Tension Head: 6-32
• Set: No

AX TWD-4

• Tri-Wing is a registered trademark of the Phillips Screw Company.

• Tri-Wing is a registered trademark of the Phillips Screw Company.

• Weight: 0.013 lb

• Drive: Hex Insert
• Fastener Type: Tri-Wing

• Overall Length: 1.0 in, 25.0 mm
• Recess Size: 4
• Screw Size Shear Head: 10-32
• Screw Size Tension Head: 8-32
• Set: No

AX TWD-6

• Tri-Wing is a registered trademark of the Phillips Screw Company.

• Tri-Wing is a registered trademark of the Phillips Screw Company.

• Weight: 0.029 lb

• Drive: Hex Insert
• Fastener Type: Tri-Wing

• Overall Length: 1.0 in, 25.0 mm
• Recess Size: 6
• Screw Size Shear Head: 5/16
• Screw Size Tension Head: 1/4
• Set: No

AX TX-1108

• Weight: 0.032 lb
• Diameter Drive End (C): 1/2 in, 12.7 mm
• Diameter Nose End (B): 3/8 in, 9.5 mm

• Driver Size: E-8

• Magnetism: Non-Magnetic

• Opening Modifier: Torx

• Overall Length A: 1 in, 25.4 mm
• Set: No

AX TX-1404

• Weight: 0.027 lb
• Diameter Drive End (C): 1/2 in, 12.7 mm
• Diameter Nose End (B): 1/4 in, 6.4 mm

• Driver Size: E-4

• Magnetism: Non-Magnetic

• Opening Modifier: Torx

• Overall Length A: 1 in, 25.4 mm
• Set: No

AX TX-1408

• Weight: 0.031 lb
• Diameter Drive End (C): 1/2 in, 12.7 mm
• Diameter Nose End (B): 3/8 in, 9.5 mm

• Driver Size: E-8

• Magnetism: Non-Magnetic

• Opening Modifier: Torx

• Overall Length A: 1 in, 25.4 mm
• Set: No

AX TX-1410

• Weight: 0.036 lb
• Diameter Drive End (C): 1/2 in, 12.7 mm
• Diameter Nose End (B): 1/2 in, 12.7 mm

• Driver Size: E-10

• Magnetism: Non-Magnetic

• Opening Modifier: Torx