Sealant and Adhesives

LC 1573138

Static Mixer, 8mm, 24E F 10 Pack

LC 97233

Luer-Lok Kit, Pkg of 25

GG 24X167

LSR F4-55 SYSTEM, 55GAL/55GAL, CASTERS

1:1 Ratio 55 gal (200 liter) F4 Fluid Automation System with Casters

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.

Ideal for manufacturing in the following industries: medical, infant care, consumer products, automotive, industrial parts, wearables.

Precise ratio control, minimal material waste

• The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.
• The result: More precise mixing, a better end product and less wasted material.

Easier operation with Graco Control Architecture

• The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools

Better Color Control

• Mix two additive streams at ratios ranging from 0.5 to 6%

Easy Set-up and Operation

• Proprietary Graco Control Architecture (GCA) is user friendly, providing easier operation and troubleshooting

Maintains Material Integrity

• Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material

Cleanroom Convenience

• A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance

LC 32515

AA 3412 Speedbonder 50 Ml, Each, 10/Minimum

LC 98853

Fixmaster Metal Magic Steel

LC 41161

411 Prism Clear Toughened

LC 250052

Pneumatic applicator/gun for 570ML sausage tubes

LC 318654

Ca Dispense Valve

LC 32389

Silatech Clear

LC 984685

Valve Rebuild Kit

LC 41650

Super Bonder 416 (1 Oz.)

LC 720173

Mix Nozzle Kit, Pack of 10

LC 600972

Tips Dispensing Blue 22G Polypropylene ( 50 pk )

LC 902521

Foot Switch for 98666 Dispense

GG 24X169

LSR F4-55 SYSTEM, 55GAL/55GAL

1:1 Ratio 55 gal (200 liter) F4-55 Fluid Automation System

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.

Ideal for manufacturing in the following industries: medical, infant care, consumer products, automotive, industrial parts, wearables.

Precise ratio control, minimal material waste

• The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.
• The result: More precise mixing, a better end product and less wasted material.

Easier operation with Graco Control Architecture

• The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools

Better Color Control

• Mix two additive streams at ratios ranging from 0.5 to 6%

Easy Set-up and Operation

• Proprietary Graco Control Architecture (GCA) is user friendly, providing easier operation and troubleshooting

Maintains Material Integrity

• Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material

Cleanroom Convenience

• A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance

GG 255442

MD2 VALVE, ASSY, 1:1, HS, GUN, AIR

1:1 Ratio, Hard Seat, Air-Actuated Gun, Non-adjustable Snuff-back, Manual Handle Manual gun option for mixing dispense (MD) valve for 2 component materials supports minimizing maintenance while maximizing production. Static valve reliably dispenses and mixes a wide range of 2 component sealants and adhesives. 1:1 ratio nose handles a wide range of material. Carbide hard seats and hardened needles are good for abrasive material and stall against pressure applications. Hand held valve with internal air trigger controls the air piston that operates the MD2 valve. A pilot port can be used to control a pump motor. Non-adjustable snuff-back control keeps shut-off performance consistent for a clean bead dispense. Maximum flow rate is 25 to 30 cc/s, depending on material viscosity. Snuff-back control prevents dripping as it brings material back into the valve until next dispense. Hand held pneumatic handle eases manual dispense.

GG 255901

MD2 VALVE, DISPENSE, 1:1, ELITE, SNUFF

MD2 Valve, 1:1 Ratio, Elite Hard Seat, Non-adjustable Snuff-back Mixing dispense (MD) valve for 2 component materials minimizes maintenance while maximizing production. Static valve with Elite construction reliably dispenses highly abrasive thermal interface materials (TIMs), silicones, urethanes, and epoxies. 1:1 ratio nose handles a wide range of material. Hard seats with Elite construction withstand highly abrasive material at least 10 times longer than standard construction. (Data verified in Graco test environment.) Snuff-back control prevents dripping as it brings material back into the valve until next dispense. Non-adjustable snuff-back control keeps shut-off performance consistent for a clean bead dispense. Maximum flow rate is 25 to 30 cc/s, depending on material viscosity. No unique tools are required for maintenance or repair. Grease isolation chamber protects moisture sensitive materials and has accessible grease fittings for easy maintenance No unique tools required

GG 25C861

LSR SYSTEM, 1:1 EXTRUDER, 5/5GAL

1:1 Extruder, Stainless Steel, for Liquid Silicone Rubber

LC 1046901

High Pressure Benchtop 300 ML Cartridge Dispenser

LC 135550

Semi Auto Controller

LC 2068378

Teroson MS 939NA Black 290ml, 10/case

LC 2246816

HST 2, Chemical Metering Pump, 0 - 2 GPH, 120VAC/60 Hz

LC 229807

Loctite 4061 1 Lb., 10 piece minimum

LC 2693825

LOCTITE EQ HD14, 400ML

LC 39633

Static Mix Nozzles 400ml (must order in case qty of six)