DYNABRADE INC. S12699

DY 61204

For 55 Gallon (208 L) Drum-Wheel Base Sold Separately, Dry Heavy Chip

Dynabrade's family of DrumVac Kits are a multi-industry clean air solution with fully integrated features designed to keep an operator working without being concerned with the arduous task of changing out a vacuum bag in high collection scenarios. Used in conjunction with a 55-gallon drum (sold separately), this system lends itself to one of the largest capacity portable dust and dry chip collection systems in the industry.

55 Gallon drum equates to large collection capacity. No bag change-out requirements. Anti-Static clean up kit eliminates static discharge to operator.

DY 61205

For 55 Gallon (208 L) Drum-Wheel Base Sold Separately, Wet Heavy Chip

Dynabrade's family of DrumVac Kits are a multi-industry clean air solution with fully integrated features designed to keep an operator working without being concerned with the arduous task of changing out a vacuum bag in high collection scenarios. Used in conjunction with a 55-gallon drum (sold separately), this system lends itself to one of the largest capacity portable dust and wet chip collection systems in the industry.

55 Gallon drum equates to large collection capacity. No bag change-out requirements. Anti-Static clean up kit eliminates static discharge to operator.

DY 61421V

20 Gallon (78 L), 15 A, 120V/60 Hz, M-Class, Stainless Steel-Conductive, Dry Only, N. America

DY 61363

DY 61420

DY 61447

DY 61495

DY 61485

DY 62410

2.50in I.D. x 6.375in O.D. x 2.75in H

DY 61467

Division 1, Auto On/Off, Silencer

DY 65265

DY 62719

DY 64449

DY 62483

9.00in I.D. x 11.50in O.D. x 2.75in H

DY 64404

230 V (AC), 3 Phase, 60 Hz, Side Exhaust,

Meets These NFPA Requirements: Interlock Pneumatic Valve with Blower and Time-Delay. Tools operate only when Downdraft Table is running. Class II, Group E Explosion-Proof Motor. Aluminum Top for Non-Spark Work Surface. Non-Spark Aluminum Blower on Collector?s Clean-Air Side. Automatic Water Level Control. Vented Sump (Main Tank). Low Voltage Control. Lockable Fused Power Disconnect

Ideal for capturing aluminum and titanium dust. Working area of 36in wide x 60in long accommodates large work pieces. Includes casters for easy maneuvering. casters also lock securely into place.

• HP: 3.0

DY 65130

DY 65132

DY 64467

DY 66402

1.86 hp, 7,200 RPM, Side Exhaust, 4,700 SFPM, for 1-1/2in W x 24in L (38 mm x 610 mm) Belts

For use on metal, glass, stone, rubber, ceramic, carbide composites and other hard to grind materials. Mounts to standard lathes. Simple tool holder mounting. Holds close tolerances.

Reduce surface finish on materials prior to a superfinishing process.In-line belt tracking prevents uneven belt stretching, as found on conventional belt tracking arrangements.

• HP: 1.86
• Max. RPM: 7200.0
• Motor RPM: 7200

DY 64986

DY 64805

DY 62340

DY 65750

3 hp, 3,450 RPM, Wet, 240 V (AC), 1 Phase, 60 Hz, 7,200 SFPM

Mounts to Standard Lathes, for Applications from Grinding to Superfinishing. Model features air-powered belt tensioning.

Model features fixed speed for faster cutting. Easily accessible belt tracking and tensioning adjustments.Coolant nozzle with adjustable flow valve.

• HP: 3.0
• Max. RPM: 3450.0
• Motor RPM: 3450

DY 65236

DY 64206

230 V, 1 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 33in (84 cm) W x 60in (152 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes two filters.

• HP: 1.0

DY 62564

DY 77817

• Motor RPM: 13,300

DY 78009

Used for a wide range of applications including decorative finishing, surface conditioning and blending on a variety of metals. Tough reinforced nylon and abrasive belts allow controlled cut to eliminate gouging, run cool and leave burr free finishes.

DynaBrite belts are made of a non-woven nylon which is impregnated with abrasive grain and resin, perfect for: Light and heavy duty cleaning, Deburring, Blending, Polishing and Finishing.

DY 78018

Used for a wide range of applications including decorative finishing, surface conditioning and blending on a variety of metals. Tough reinforced nylon and abrasive belts allow controlled cut to eliminate gouging, run cool and leave burr free finishes.

DynaBrite belts are made of a non-woven nylon which is impregnated with abrasive grain and resin, perfect for: Light and heavy duty cleaning, Deburring, Blending, Polishing and Finishing.

DY 78022

Used for a wide range of applications including decorative finishing, surface conditioning and blending on a variety of metals. Tough reinforced nylon and abrasive belts allow controlled cut to eliminate gouging, run cool and leave burr free finishes.

DynaBrite belts are made of a non-woven nylon which is impregnated with abrasive grain and resin, perfect for: Light and heavy duty cleaning, Deburring, Blending, Polishing and Finishing.

DY 78047

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78048

Used for a wide range of applications including decorative finishing, surface conditioning and blending on a variety of metals. Tough reinforced nylon and abrasive belts allow controlled cut to eliminate gouging, run cool and leave burr free finishes.

DynaBrite belts are made of a non-woven nylon which is impregnated with abrasive grain and resin, perfect for: Light and heavy duty cleaning, Deburring, Blending, Polishing and Finishing.

DY 78075

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78076

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78077

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78099

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 78101

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 78112

A premium ceramic high performance mineral that is sharp, hard and tough. It micro fracturing and slf sharpening characteristics make it one of the most versatile minerals that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

The best choice for high heat and high grinding pressure applications that is also effective on many materials at lower grinding pressures.

DY 78113

A premium ceramic high performance mineral that is sharp, hard and tough. It micro fracturing and slf sharpening characteristics make it one of the most versatile minerals that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

The best choice for high heat and high grinding pressure applications that is also effective on many materials at lower grinding pressures.

DY 78190

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78177

The most consistent cutting and finishing surface conditioning product

Provides the higher cut rate of a coaser grit while generating the finish of finer grits

DY 78122

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78291

A good choice for deburring and finishing, weld blending and finishing with one product to reduce the number of steps

Provides a controlled sustained finish

DY 78194

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78294

A good choice for deburring and finishing, weld blending and finishing with one product to reduce the number of steps

Provides a controlled sustained finish

DY 78326

Dynabrite interleaf spindle mount flap wheels and wheels are an ideal choice for a broad range blending and finishing applications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

DY 78327

Dynabrite interleaf spindle mount flap wheels and wheels are an ideal choice for a broad range blending and finishing applications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

DY 78378

Thick, strong synthetic fibers and coarse abrasive with a smear-resistant adhesive for quick and easy cleaning and conditioning.

Clean welds, removal of paint/coatings, scale and oxidation.

DY 78710

Orange, 1/8in x 1-1/2in Spindle, 60K RPM Max

Cool Cutting with less Burn

for small job applications or where price is the main consideration

DY 78775

1/8in Spindle

Alumina zirconia/aluminum oxide blend provides up to 35% faster cut rate than standard aluminum oxide mounted points

Aggressive free cutting action cleans more parts in less time, increasing productivity

DY 78713

Orange, 1/8in x 1-1/2in Spindle, 105K RPM Max

Cool Cutting with less Burn

for small job applications or where price is the main consideration

DY 79034

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79035

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79151

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79367

Similar vacuum extraction rates vs. other multi-holed and screen-type abrasives (while using multi-hole back-up pad)

Enhanced extraction rates vs. standard 5in five-hole and 6in six-hole discs. 90% mineral coverage.

DY 82569

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79715

DY 79706

Premium 100% wool polishing pads with an integrated foam interface layer that provides maximum cutting performance on fresh, cured and worn paint surfaces.

DynaWool™. pads are the most abrasive polishing pad generating the highest cut rate.

DY 84853

Extreme Orange premium foam abrasives are manufactured with high performance aluminum oxide abrasive, bonded directly onto our proprietary polyurethane foam with 100% solids adhesive.

The extremely sharp and friable P-graded aluminum oxide abrasive produces a fast cutting action under light pressure for consistent material removal and finish throughout the life of the product

DY 84852

Extreme Orange premium foam abrasives are manufactured with high performance aluminum oxide abrasive, bonded directly onto our proprietary polyurethane foam with 100% solids adhesive.

The extremely sharp and friable P-graded aluminum oxide abrasive produces a fast cutting action under light pressure for consistent material removal and finish throughout the life of the product

DY 79862

Manufactured using a unique miro-repliction process to generate precisely graded uniformly shaped abrasives that generate the same finish from the start of the process to the end

Premium film backing provides the flattest surface and promotes a consisente finish

DY 79500

sharp fast cutting heat trated aluminum oxide abrasive helps to maintain Ra finish specifications throughout product life, reducing scrap and rework

proprietary resin technology eliminates smearing even on high nickel alloys

DY 79491

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79492

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79402

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79366

Similar vacuum extraction rates vs. other multi-holed and screen-type abrasives (while using multi-hole back-up pad)

Enhanced extraction rates vs. standard 5in five-hole and 6in six-hole discs. 90% mineral coverage.

DY 79501

sharp fast cutting heat trated aluminum oxide abrasive helps to maintain Ra finish specifications throughout product life, reducing scrap and rework

proprietary resin technology eliminates smearing even on high nickel alloys

DY 79961

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79364

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The premium film backing resists edge tearing and promotes better grain adhesion for longer useful life

DY 79712

First cut, or 1500 grit scratches or finer.

Removes grit P1500 sanding marks in seconds, leaving a brilliant finish

Unmatched cutting and gloss features

DY 89212

high perfomance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

DY 89211

high perfomance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

DY 79701

Premium 100% wool polishing pad with an integrated orange foam interface layer

Provides maximum cutting performance on fresh, cured and worn paint surfaces

DY 90027

Reattachable Hook-Face Backing

Good choice for the application and removal of waxes and polishes.

Unlike Wool [pads, the long fibers of 100% cotton terry cloth pads are less likely to become caked with wax and polish.

DY 90028

Reattachable Hook-Face Backing, Polishing/White

Synthetic Wool: Final finishing and polishing.

Hook and loop backing makes pads changes quick and easy

DY 90290

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90289

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90277

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 79703

This all-purpose, semi-firm pad with a fine, closed-cell foam structure is ideal for final finish and sealing applications

Use with Dynabrade DynaOrange Polishing compound to generate swirl free and hologram free finishes on all clear coats and any color

DY 90355

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 79487

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79502

sharp fast cutting heat trated aluminum oxide abrasive helps to maintain Ra finish specifications throughout product life, reducing scrap and rework

proprietary resin technology eliminates smearing even on high nickel alloys

DY 90294

High performance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

DY 90599

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90601

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90602

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90925

DynaCut Zirconia Alumina flap discs are manufactured with a ZA grain that is sharp, hard and tough. It works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

For stock removal, deburring, blending, edge-chamfering and rust removal. Can also be used for general cleaning and finishing.

DY 91114

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90996

DY 91116

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91115

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91118

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91119

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91162

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91128

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91439

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91438

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91538

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 91543

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 91552

Extreme Orange Premium Film Disc, 50 pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs