INGERSOLL-RAND IR TOOL S12880
Distributor Pneumatique 5/3 Centre Ferme
IR 38776332
Distributor Pneumatique 5/3 Centre Ferme
Reverse Valve
IR 3940-329
Reverse Valve Service Part for Ingersoll Rand Power Tools
THROTTLE VALVE PLUNGER
IR 3940A-302
Throttle Valve Plunger Service Part for Ingersoll Rand Power Tools
1" Impactool, Atex
IR 3940B2TIEX
1" Air Impact Wrench, ATEX/Hazardous Duty, 2750 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Description: Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 2750 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry. ATEX Marking ATEX 2014/34/EU Ex h IIA T6 Gb X and ISO 80079-36 Certified.
Features And Benefits:
- Environmental, Health and Safety: ISO 80079-36 and ATEX 2014/34/EU, Ex h IIA T6 Gb X Certified to meet ATEX Zone 1 or Zone 2 requirements.
- Power: High torque output of 2750 ft-lbs and 800 blows per minute. The reverse bias motor helps remove the most stubborn bolts and the twin hammer mechanism ensures consistent power and balance.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Reverse bias motor to help remove the most stubborn bolts.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses:
Hazardous Zones, Vehicle Repair, General Industrial, Facility Maintenance
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 64
- Average Air Consumption (l/min): 1812
- Blows per Min: 800
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Atex/Hazardous Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 103.4 / 114.4
- Hammer Case: Titanium
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 100.6 / 111.6
- Max Bolt Diameter (in): 1-3/8
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 2750
- Max Torque (in-lb): 33004
- Max Torque (nm): 3729
- Min Hose Size (in): 3/4
- Motor: Reverse Bias
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 117.9
- Product Length (in): 13.5
- Product Weight (lb): 21.2
- Quiet Tool: No
- Recommended Forward Torque Range (ft-lb): 500-1800
- Recommended Forward Torque Range (in-lb): 6001-21596
- Recommended Forward Torque Range (nm): 678-2440
- Retainer Type: Thru-hole
- Special Features: ATEX Rated, Titanium hammercase
- Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
- Tool Type: Full-size
- Vanes: 7
- Vibration Level (m/s2): 13.1
- Vibration Uncertainy K* (m/s2): 1.6
- Warranty: 1-year
- Accessories: SK8H9TN
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2940-726
- Parts: 3934-123
- Parts: 3940-TK1
3940-Tk1-Tune Up Kit
IR 3940-TK1
Tune-up Kit for Ingersoll Rand 3940 Series Air Impact Wrench
Product Application and Uses:
For use with Ingersoll Rand 3940A1TI, 3940A2TI, 3940B1TI, 3940B2TI, 3940B2TIEX Impact wrenches
- Includes: (2) Seals, (1) Throttle Valve Spring, (1) Air Strainer Screen, (4) Gasket, (1) Rear Motor Bearing, (1) Front Motor Bearing, Vane pack, (3) Springs, (1) Ball, (1) Pin
- For Use With: 3940B2TI
- For Use With: 3940B2TIEX
- For Use With: 3940P2TI
Impactool
IR 3942B1TI
No. 5 Spline Air Impact Wrench, Super Duty, 3250 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
Description: With a titanium hammercase, bronze end plates and torque up to 3,250 ft-lbs, the 3900 Series are the premier industrial grade impacts in the industry.
Features And Benefits:
- Power: The 3900 Series delivers a high torque output of 3250 ft-lbs and 850 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
Product Application and Uses:
Heavy Industry, Oil&Gas, Foundry
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 95
- Average Air Consumption (l/min): 2690
- Blows per Min: 850
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): No. 5
- Drive Type: Spline
- Duty Rating: Super Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 102.7 / 113.7
- Hammer Case: Titanium
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 99.0 / 110.0
- Max Free Speed (rpm): 5000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 3250
- Max Torque (in-lb): 39005
- Max Torque (nm): 4407
- Min Hose Size (in): 3/4
- Motor: Reverse Bias
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 14.3
- Product Weight (lb): 22.6
- Quiet Tool: No
- Recommended Forward Torque Range (ft-lb): 3000
- Recommended Forward Torque Range (in-lb): 36005
- Recommended Forward Torque Range (nm): 4068
- Retainer Type: Thru-hole
- Special Features: Titanium hammercase
- Tool Type: Full-size
- Vanes: 7
- Vibration Level (m/s2): 16.9
- Vibration Uncertainy K* (m/s2): 4.6
- Warranty: 1-year
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 3940-123
1" Impactool, Atex
IR 3942B2TIEX
1" Air Impact Wrench, ATEX/Hazardous Duty, 3250 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Description: Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 3250 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry. ATEX Marking ATEX 2014/34/EU Ex h IIA T6 Gb X and ISO 80079-36 Certified.
Features And Benefits:
- Environmental, Health and Safety: ISO 80079-36 and ATEX 2014/34/EU, Ex h IIA T6 Gb X Certified to meet ATEX Zone 1 or Zone 2 requirements.
- Power: The 3900 Series delivers a high torque output of 3250 ft-lbs and 850 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Reverse bias motor to help remove the most stubborn bolts.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses:
Hazardous Environment, Heavy Industry, Oil&Gas, Foundry
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 95
- Average Air Consumption (l/min): 2690
- Blows per Min: 800
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Atex/Hazardous Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 102.7 / 113.7
- Hammer Case: Titanium
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 99.0 / 110.0
- Max Bolt Diameter (in): 1-3/8
- Max Free Speed (rpm): 5000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 3250
- Max Torque (in-lb): 39005
- Max Torque (nm): 4407
- Min Hose Size (in): 3/4
- Motor: Reverse Bias
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 144
- Product Length (in): 14.3
- Product Weight (lb): 22.6
- Quiet Tool: No
- Recommended Forward Torque Range (ft-lb): 3000
- Recommended Forward Torque Range (in-lb): 36005
- Recommended Forward Torque Range (nm): 4068
- Retainer Type: Thru-hole
- Special Features: ATEX Rated, Titanium hammercase
- Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
- Tool Type: Full-size
- Vanes: 7
- Vibration Level (m/s2): 16.9
- Vibration Uncertainy K* (m/s2): 4.6
- Warranty: 1-year
- Accessories: SK8H9TN
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2940-726
- Parts: 3940-123
- Parts: 3942-TK1
1.5" Impactool
IR 3955A2TI
1-1/2" Air Impact Wrench, Super Duty, 5000 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Outside Trigger
Description: With a titanium hammercase, bronze end plates and torque up to 5,000 ft-lbs of torque, the 3900 Series are the premier industrial grade impacts in the industry.
Features And Benefits:
- Power: The 3900 Series delivers a high torque output of 5000 ft-lbs and 700 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding.
Product Application and Uses:
Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding.
- Actuation/Throttle Type/Switch Type: Outside Trigger
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 80
- Average Air Consumption (l/min): 2266
- Blows per Min: 700
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 1-1/2
- Drive Type: Square
- Duty Rating: Super Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 101.5 / 112.5
- Hammer Case: Titanium
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 101.2 / 112.2
- Max Free Speed (rpm): 2750
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 5000
- Max Torque (in-lb): 60000
- Max Torque (nm): 6779
- Min Hose Size (in): 3/4
- Motor: Reverse Bias
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 16.5
- Product Weight (lb): 34.6
- Quiet Tool: No
- Recommended Forward Torque Range (ft-lb): 3900
- Recommended Forward Torque Range (in-lb): 46803
- Recommended Forward Torque Range (nm): 5288
- Retainer Type: Thru-hole
- Special Features: Titanium hammercase
- Tool Type: High-torque
- Vibration Level (m/s2): 20.8
- Vibration Uncertainy K* (m/s2): 8.5
- Warranty: 1-year
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
Cap Screw, Socket Head
IR 3955-638
Socket Head Cap Screw Service Part for Ingersoll Rand Power Tools, Qty 4
1.5" Impactool, Atex
IR 3955B2TIEX
1-1/2" Air Impact Wrench, ATEX Rated, 5000 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Description: Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with a titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 5000 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry.ATEX Markings: ATEX 2014/34/EU and Ex h IIA T6 Gb XISO 80079-36 Certified
Features And Benefits:
- Environmental, Heath and Safety: ISO 80079-36 Certified and ATEX Zone 1 or Zone 2 requirements.
- Power: The 3900 Series delivers a high torque output of 5000 ft-lbs and 700 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this series is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses:
Hazardous Zones, Vehicle Repair, General Industrial, Facility Maintenance
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 80
- Average Air Consumption (l/min): 2266
- Blows per Min: 700
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 1-1/2
- Drive Type: Square
- Duty Rating: Atex/Hazardous Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 101.5 / 112.5
- Hammer Case: Titanium
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 101.2 / 112.2
- Max Bolt Diameter (in): 1-1/2
- Max Free Speed (rpm): 2750
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 5000
- Max Torque (in-lb): 60000
- Max Torque (nm): 6779
- Min Hose Size (in): 3/4
- Motor: Reverse Bias
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 144.5
- Product Length (in): 16.6
- Product Width (in): 8.2
- Product Height (in): 5.3
- Product Weight (lb): 34.6
- Quiet Tool: No
- Recommended Forward Torque Range (ft-lb): 4700
- Recommended Forward Torque Range (in-lb): 56397
- Recommended Forward Torque Range (nm): 6372
- Retainer Type: Thru-hole
- Side to Center Distance (in): 4.1
- Side to Center Distance (mm): 104
- Special Features: ATEX Rated, Titanium hammercase
- Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
- Tool Type: Full-size
- Vanes: 7
- Vibration Level (m/s2): 20.8
- Vibration Uncertainy K* (m/s2): 8.5
- Warranty: 1-year
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2950-726
Hammer Case Gasket
IR 3955-36
Hammer Case Gasket Service Part for Ingersoll Rand Power Tools
1-1/2in Pneumatic Impact, Sq. Dr.
IR 3956B2TI
1-1/2 inch Air Impact Wrench, 5450 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
Description: The 3956 Series Titanium Pneumatic Impacts has a 360 degrees D-auxiliary handle ensures enhanced ergonomic performance, with greater access and less operator fatigue. An increased power rating provides the confidence you need to power through the toughest of jobs. Our brand name prominently and proudly emblazoned on the side lets you know it's from the first name in impact tools: Ingersoll Rand. Because when it comes to performance, durability and reliability, there is simply no substitute for the best.
Features And Benefits:
- Performance: Best-in-class power-to-weight performance, delivering 5,450 ft-lbs (7,300 Nm) of breakaway torque.
- Ergonomic: Ergonomically enhanced 360 degrees D-auxiliary handle.
- Reliability: Assembled in the USA and backed by our broad network of parts and service to ensure unsurpassed serviceability.
- Durability: Optimized titanium hammercase, along with bronze endplates and corrosion-resistant parts.
- Includes: Hanger Bracket
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Consumption @ Load (cfm): 105
- Air Consumption @ Load (l/min): 2971.5
- Air Inlet: 1/2 inch NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 145
- Average Air Consumption (l/min): 4103.5
- Blows per Min: 700
- Color: Grey
- Configuration/Handle Type: D-Handle
- Configuration/Handle Type: Auxiliary Handle
- Drive Size (in): 1-1/2
- Drive Type: Square
- Duty Rating: Industrial Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 98.8 / 109.8
- Hammer Case: Titanium
- Handle Material: Aluminum
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 97.9 / 108.9
- Max Bolt Diameter (in): 1-1/2
- Max Free Speed (rpm): 3600
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 5384
- Max Torque (in-lb): 64610
- Max Torque (nm): 7300
- Min Hose Size (in): 3/4
- Motor: Reverse Bias
- Number of Power Settings: Continuous
- Nut-busting/Breakaway Torque (ft-lb): 5384
- Nut-busting/Breakaway Torque (in-lb): 64610
- Nut-busting/Breakaway Torque (nm): 7300
- Power Source: Air Powered
- Product Length (in): 16.68
- Product Width (in): 5.26
- Product Height (in): 11.31
- Product Weight (lb): 34.3
- Quiet Tool: No
- Recommended Forward Torque Range (ft-lb): 5178
- Recommended Forward Torque Range (in-lb): 62132
- Recommended Forward Torque Range (nm): 7020
- Retainer Type: Thru-hole
- Side to Center Distance (in): 2.67
- Side to Center Distance (mm): 68
- Standard Bolt Capacity (in): 2
- Standards/Certifications: ISO11148-6 2012, CAGIB186.1-2009, ISO 28927-2, ISO 15744
- Tool Type: High-torque
- Vanes: 7
- Vibration Level (m/s2): 16.4
- Vibration Uncertainy K* (m/s2): 5.6
- Warranty: 1-year
- Parts: TK-3956-GTK
- Parts: TK-3956TI-727
Retaining Pin 4X22 Clamp Gpm 250, Gp 250
IR 9500.3134.4
Retaining Pin 4X22 Clamp Gpm 250, Gp 250
Air Motor
IR 992RM1
Spur Gear Air Motor, 7/8" Keyed Shaft, 3600 RPM, 8.15 HP, 52.9 NM, Reversible
- Air Consumption at Max HP (scfm): 230
- Air Inlet: 1" NPT
- Air Pressure (psi): 90
- Drive Size (in): 7/8
- Drive Type: Round Keyed
- Exhaust Location: Side
- Finish: Paint, Yellow
- Gear Train: Spur Gear
- Housing Material: Aluminum
- Max Free Speed (rpm): 3600
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 39
- Max Torque (in-lb): 468
- Max Torque (nm): 52.9
- Motor: Rotary Vane
- Motor: Spur Gear
- Mounting Type: Face
- Number of Mounting Holes: 18
- Power Source: Air Powered
- Product Weight (lb): 24.25
- Rated Power (hp): 8.15
- Rated Power (kW): 6.08
- Reversible: Reversible
- Speed at Max Power (rpm): 1730
- Starting Torque (ft-lb): 29
- Starting Torque (nm): 38.9
- Warranty: 1-year
Retainer, Quick Change
IR 9510
Quick Change Chisel Retainer for Ingersoll Rand Air Hammers, .401" Shank
Product Application and Uses:
For use with Ingersoll Rand 115, 116, 117, 114GQC, 119MAX, 123MAX, 135MAX Air Hammers
- Color: Silver
- Retainer Type: Quick Change
- Shank SIze (in): .401
- For Use With: 114GQC
- For Use With: 115K
- For Use With: 116
- For Use With: 116-EU
- For Use With: 116H-EU
- For Use With: 116K
- For Use With: 117
- For Use With: 117-EU
- For Use With: 117K
- For Use With: 119MAX
- For Use With: 119MAXH
- For Use With: 119MAXHK
- For Use With: 119MAXK
- For Use With: 121-K6
- For Use With: 123MAX
- For Use With: 123MAXK
- For Use With: LA426-EU
- For Use With: LA427-EU
Vane Pack
IR 99V60-42-4
Vane Pack for Ingersoll Rand 99H, 99V Series Air Grinder, 4-Pack
Digger
IR 95LA1
Digger, 7/8 x 3-1/4" Hex Shank, 1850 BPM, 4" Stroke Length, 1.69" Bore
Description: The 95 Series diggers are meant for heavy duty work, from foundation work, to piping, to break demolition. With a 4 inch piston stroke, and a steel cone, these diggers will not let you down.
Features And Benefits:
- Weight: With a die cast aluminum handle and housing, the 95 Series is as lightweight (weighing 28 lbs.) as it is powerful, making hard work easy.
- Durability: Built with premium materials, the 95 Series can withstand harsh conditions and repeated drops without affecting its performance.
- Reliability: The 95 Series is equipped with rubber buffer retainers to absorb shock and prolong the life of your tool.
Product Application and Uses:
Foundation work, piping, break demolition
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Consumption @ Load (cfm): 47
- Air Consumption @ Load (l/min): 1331
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Blows per Min: 1850
- Bore Diameter (in): 1.69
- Collar Type: Round
- Color: Beige
- Configuration/Handle Type: D-Handle
- Duty Rating: Industrial Duty
- Exhaust Location: Side
- Housing Material: Aluminum
- Max Pressure (bar): 6.2
- Min Hose Size (in): 1/2
- Power Source: Air Powered
- Product Length (in): 21.88
- Product Weight (lb): 28
- Retainer Type: Latch
- Shank SIze (in): 7/8 x 3-1/4
- Shank Type: Hex
- Stroke Length (in): 4
- Vibration Level (m/s2): 29.5 / 6.6
- Warranty: 1-year
- Accessories: 22040778
- Accessories: 22040935
- Accessories: 45510542
- Accessories: 45510559
- Accessories: 45510583
- Accessories: 45510682
- Accessories: 45510690
- Accessories: 45510708
- Accessories: 45510716
- Accessories: 45512621
- Accessories: 45512639
- Accessories: 45512647
- Accessories: 50050269
- Accessories: 50050285
- Accessories: 50189596
- Accessories: 50195288
- Accessories: 50195296
- Accessories: 50199207
- Accessories: 50199215
- Accessories: 51305860
Vertical Grinder
IR 99V60P109
Vertical Air Grinder, 9" Type 27/28 Wheel, 6,000 RPM, 3 HP, 5/8 in-11 Thread, Side Exhaust
Description: The 99 Series Vertical Grinders are tough and reliable, with a number of features that help you get the job done faster, easier and safer.
Features And Benefits:
- Power: The 99 Series Vertical Grinder sports a powerful vane motor and an ideal power-to-weight ratio at 11.3 lbs, 3HP and 6,000 RPM.
- Safety: The included guard on the 99 Series block sparks and debris from flying back at you, while the locking throttle lever prevents accidental throttle operation.
- Reliable: Designed for heavy-duty production applications, the 99 Series Vertical Grinder is a trusted tool that will last you years to come.
Product Application and Uses:
These air grinders are designed for material removal or cutting off using a rotated abrasive wheel.
- Includes: Tools, Large Wrench, Small Wrench
- Actuation/Throttle Type/Switch Location: Handle
- Actuation/Throttle Type/Switch Type: Safety Lever
- Air Consumption @ Load (cfm): 84
- Air Consumption @ Load (l/min): 2379
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Bearing Type: Ball Bearing
- Color: Black
- Configuration/Handle Type: Vertical
- Duty Rating: Industrial Duty
- Exhaust Location: Side
- Grinder Type: Vertical Grinder
- Guard Material: Steel
- Handle Material: Composite
- Height Over Spindle (in): 6.9
- Housing Material: Steel
- Lock Mechanism: Lever lock in off position
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Min Hose Size (in): 3/4
- Power Source: Air Powered
- Product Length (in): 6.88
- Product Weight (lb): 11.25
- Rated Power (hp): 3
- Right Angle Length (in): 7.95
- Right Angle Length (mm): 202
- Sound Pressure/Power Db(A): 82.5 / 93.5
- Vibration Level (m/s2): 3.4
- Warranty: 1-year
- Wheel Diameter (in): 9
- Wheel Thickness (in): 1/4
- Wheel Type: Type 27, 28
- Lubrication: 10P
Vertical Grinder
IR 99V60P107
Vertical Air Grinder, 7" Type 27/28 Wheel, 6,000 RPM, 3 HP, 5/8 in-11 Thread, Side Exhaust
Description: The 99 Series Vertical Grinders are tough and reliable, with a number of features that help you get the job done faster, easier and safer.
Features And Benefits:
- Power: The 99 Series Vertical Grinder sports a powerful vane motor and an ideal power-to-weight ratio at 2.8 lbs and 6,000 RPM.
- Safety: The included guard on the 99 Series block sparks and debris from flying back at you, while the locking throttle lever prevents accidental throttle operation.
- Reliable: Made with you in mind, the 99 Series Vertical Grinder is a trusted tool that will last you years to come. Comes with a 1-year warranty.
Product Application and Uses:
These air grinders are designed for material removal or cutting off using a rotated abrasive wheel.
- Includes: Tools, Large Wrench, Small Wrench
- Actuation/Throttle Type/Switch Location: Handle
- Actuation/Throttle Type/Switch Type: Safety Lever
- Air Consumption @ Load (cfm): 84
- Air Consumption @ Load (l/min): 2379
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Bearing Type: Ball Bearing
- Color: Black
- Configuration/Handle Type: Vertical
- Duty Rating: Industrial Duty
- Exhaust Location: Side
- Grinder Type: Vertical Grinder
- Guard Material: Steel
- Handle Material: Composite
- Height Over Spindle (in): 6.9
- Housing Material: Steel
- Lock Mechanism: Lever lock in off position
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Min Hose Size (in): 3/4
- Power Source: Air Powered
- Product Length (in): 6.88
- Product Weight (lb): 8.8
- Rated Power (hp): 3
- Right Angle Length (in): 7.95
- Right Angle Length (mm): 202
- Sound Pressure/Power Db(A): 81.4 / 92.4
- Vibration Level (m/s2): 2.8
- Warranty: 1-year
- Wheel Diameter (in): 7
- Wheel Thickness (in): 1/4
- Wheel Type: Type 27, 28
- Lubrication: 10P
Vertical Grinder
IR 99V60S106
Vertical Air Grinder, 5" or 6" Type 6 /11 Wheel, 6,000 RPM, 3 HP, 5/8 in-11 Thread, Side Exhaust
Description: The 99 Series Vertical Grinders are tough and reliable, with a number of features that help you get the job done faster, easier and safer.
Features And Benefits:
- Power: The 99 Series Vertical Grinder sports a powerful vane motor and an ideal power-to-weight ratio.
- Safety: The included guard on the 99 Series block sparks and debris from flying back at you, while the locking throttle lever prevents accidental throttle operation.
- Reliable: Made with you in mind, the 99 Series Vertical Grinder is a trusted tool that will last you years to come. Comes with a 1-year warranty.
Product Application and Uses:
These air grinders are designed for material removal or cutting off using a rotated abrasive wheel.
- Includes: Tools, Large Wrench, Small Wrench
- Actuation/Throttle Type/Switch Location: Handle
- Actuation/Throttle Type/Switch Type: Safety Lever
- Air Consumption @ Load (cfm): 84
- Air Consumption @ Load (l/min): 2379
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Bearing Type: Ball Bearing
- Color: Black
- Configuration/Handle Type: Vertical
- Duty Rating: Industrial Duty
- Exhaust Location: Side
- Grinder Type: Vertical Grinder
- Guard Material: Steel
- Handle Material: Composite
- Height Over Spindle (in): 6.9
- Housing Material: Steel
- Lock Mechanism: Lever lock in off position
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Min Hose Size (in): 3/4
- Power Source: Air Powered
- Product Length (in): 6.88
- Product Weight (lb): 10.8
- Rated Power (hp): 3
- Right Angle Length (in): 7.95
- Right Angle Length (mm): 202
- Sound Pressure/Power Db(A): 82.4 / 93.4
- Vibration Level (m/s2): <2.5
- Warranty: 1-year
- Wheel Diameter (in): 5 or 6
- Wheel Thickness (in): 1/4
- Wheel Type: Type 6, 11
- Lubrication: 10P
Grinder
IR 99V85P107
Vertical Air Grinder, 7" Type 27/28 Wheel, 8,500 RPM, 3 HP, 5/8 in-11 Thread, Side Exhaust
Description: The 99 Series Vertical Grinders are tough and reliable, with a number of features that help you get the job done faster, easier and safer.
Features And Benefits:
- Power: The 99 Series Vertical Grinder sports a powerful vane motor and an ideal power-to-weight ratio.
- Safety: The included guard on the 99 Series block sparks and debris from flying back at you, while the locking throttle lever prevents accidental throttle operation.
- Reliable: Made with you in mind, the 99 Series Vertical Grinder is a trusted tool that will last you years to come. Comes with a 1-year warranty.
Product Application and Uses:
These air grinders are designed for material removal or cutting off using a rotated abrasive wheel.
- Includes: Tool, Large Wrench, Small Wrench
- Actuation/Throttle Type/Switch Location: Handle
- Actuation/Throttle Type/Switch Type: Safety Lever
- Air Consumption @ Load (cfm): 84
- Air Consumption @ Load (l/min): 2379
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Bearing Type: Ball Bearing
- Color: Black
- Configuration/Handle Type: Vertical
- Duty Rating: Industrial Duty
- Exhaust Location: Side
- Grinder Type: Vertical Grinder
- Guard Material: Steel
- Handle Material: Composite
- Height Over Spindle (in): 6.9
- Housing Material: Steel
- Lock Mechanism: Lever lock in off position
- Max Free Speed (rpm): 8500
- Max Pressure (bar): 6.2
- Min Hose Size (in): 3/4
- Power Source: Air Powered
- Product Length (in): 6.88
- Product Weight (lb): 11.25
- Rated Power (hp): 3
- Right Angle Length (in): 7.95
- Right Angle Length (mm): 202
- Sound Pressure/Power Db(A): 103 / 104
- Vibration Level (m/s2): 3.6
- Warranty: 1-year
- Wheel Diameter (in): 7
- Wheel Thickness (in): 1/4
- Wheel Type: Type 27, 28
- Lubrication: 10P
3/4in STD Hog Ring Anvil Accessory
IR A61H
DXS2 3/4" Drive Standard Anvil, Friction Ring and Thru Hole Attachment
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: (1) DXS2 3/4" Drive Standard Anvil
- Anvil Length: Standard
- Drive Size (in): 3/4
- Drive Type: Square
- Product Length (in): 2.2440944881889764
- Product Width (in): 0.9940944881889764
- Product Height (in): 0.9940944881889764
- Product Weight (lb): 0.286601
- Retainer Type: Friction Ring and Thru-hole
- Warranty: 1-year
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
Payment options
