STURTEVANT RICHMONT S13210

STR 809234

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809235

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809237

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809241

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809236

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809242

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809294

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809290

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809291

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809293

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809292

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809302

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 810014

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810056

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810017

Adjustable Torque Screwdrivers: Adjustable Torque Screwdriver, Nm

Product Description

• Bi-directional Accuracy of +/- 6% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Scale on the shaft is marked in dual incrementation (in lb and Nm) on Cal 36/4, kgfcm on CAL 40
• Magnifying lens improves the view of a clearly engraved scale
• To operate, simply dial torque setting and insert bit
• Anti-backlash design enhances repeatability
• Comes with FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 810007

Preset Torque Screwdrivers: Preset Torque Screwdrivers - PM Series, in-lb

Product Description

• Bi-directional accuracy of +/- 6% preset value
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Short dwell designed to prevent repetitive motion injuries
• Preset torque using torque tester and insert a bit to use
• Can be set in any unit of torque measurement
• Long shaft for use in limited-access applications
• Uses standard 1/4" bits, adapters, and sockets
• Polished aluminum exterior
• Anti-backlash design enhances repeatability
• Can be ordered preset from factory with calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 809304

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809328

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809317

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809308

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809330

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809504

Ratcheting Square Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809306

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809507

Ratcheting Square Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809307

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809315

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809917

Standard Tooling Adapter Interchangeable Head - STA - Series

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 810045

Adjustable Torque Screwdrivers: Exactorq Adjustable Torque Screwdriver, in-oz

Product Description

• Bi-directional accuracy of +/- 6% preset value
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Short dwell designed to prevent repetitive motion injuries
• Preset torque using torque tester and insert a bit to use
• Can be set in any unit of torque measurement
• Long shaft for use in limited-access applications
• Uses standard 1/4" bits, adapters, and sockets
• Polished aluminum exterior
• Anti-backlash design enhances repeatability
• Can be ordered preset from factory with calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 809305

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809352

Box Head Interchangeable Heads for Torque Wrenches

STR 810059

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810060

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810100

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810137

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810153

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810174

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810424

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810334

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810335

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, ft-lb

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 810430

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810168

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810417

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810172

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810410

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810401

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810411

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810416

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810170

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810414

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810171

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810423

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810421

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810343

Wireless Digital Torque Wrench Accessories: Digital Torque Wrench Cover

Product Description

• Exceptional wear and tear resistance
• 2mm body with 6mm bumpers
• High impact strength
• Shore-A hardness of 95
• Upt o 580% elongation at break
• Corrosion reisitance to many common industiral oils and chemical
• Helps prevent marring
• Slides on with ease
• Chance change tool batteries without removing the cover
• Compatible Tools (Part No): 810712; 810713; 810714; 810715; 810721; 810412; 810413; 810410; 810414; 810415; 810421

STR 810415

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810420

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810485

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810501

Preset Torque Screwdrivers: Preset Torque Driver P Series, in-oz

Product Description

• Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
• Torque can be set to any unit of measure
• Be sure to use a calibrated torque tester to set the torque value
• Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
• Bi-directional versatility - preset same value for both CW and CCW measurement
• 1/4" Female Hex drive uses power bits and insert bits
• Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
• Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
• Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
• Anti-backlash design for ergonomic comfort
• Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
• Sliding T Handle assists in turning the driver at higher torque values
• Well balanced tool that feels great in your hand

STR 810503

Preset Torque Screwdrivers: Preset Torque Driver P Series, in-lb

Product Description

• Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
• Torque can be set to any unit of measure
• Be sure to use a calibrated torque tester to set the torque value
• Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
• Bi-directional versatility - preset same value for both CW and CCW measurement
• 1/4" Female Hex drive uses power bits and insert bits
• Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
• Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
• Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
• Anti-backlash design for ergonomic comfort
• Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
• Sliding T Handle assists in turning the driver at higher torque values
• Well balanced tool that feels great in your hand

STR 810502

Preset Torque Screwdrivers: Preset Torque Driver P Series, in-lb

Product Description

• Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
• Torque can be set to any unit of measure
• Be sure to use a calibrated torque tester to set the torque value
• Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
• Bi-directional versatility - preset same value for both CW and CCW measurement
• 1/4" Female Hex drive uses power bits and insert bits
• Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
• Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
• Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
• Anti-backlash design for ergonomic comfort
• Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
• Sliding T Handle assists in turning the driver at higher torque values
• Well balanced tool that feels great in your hand

STR 810525

Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

Product Description

• Adjust torque value by rotating the grip
• Grip lock makes locking in torque value fast, easy, and secure
• Tool changees from one end of the scale to the other with the fewest number of turns
• Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
• Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
• Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
• Flattened case prevents side loading during torque application or testing/calibration
• Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
• Ratchet is built for durability
• Ratchet replacement is fast and easy when needed
• All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
• Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory

STR 810568

Adjustable Torque Screwdrivers: Adjustable Torque Screwdriver Kit, 29 Piece Kit, in-lb

Product Description

• Bi-directional Accuracy of +/- 6% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Scale on the shaft is marked in dual incrementation (in lb and Nm) on Cal 36/4, kgfcm on CAL 40
• Magnifying lens improves the view of a clearly engraved scale
• To operate, simply dial torque setting and insert bit
• Anti-backlash design enhances repeatability
• Comes with FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Kit includes Hex 5/64, 3/32, 7/64, 1/8, 9/64

STR 810574

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810587

Adjustable Torque Screwdrivers: Adjustable Torque Screwdriver, in-lb

Product Description

• Bi-directional Accuracy of +/- 6% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Scale on the shaft is marked in dual incrementation (in lb and Nm) on Cal 36/4, kgfcm on CAL 40
• Magnifying lens improves the view of a clearly engraved scale
• To operate, simply dial torque setting and insert bit
• Anti-backlash design enhances repeatability
• Comes with FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 810588

Adjustable Torque Screwdrivers: Adjustable Torque Screwdriver Kit, 6 Piece Kit, in-lb

Product Description

• Bi-directional Accuracy of +/- 6% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Scale on the shaft is marked in dual incrementation (in lb and Nm) on Cal 36/4, kgfcm on CAL 40
• Magnifying lens improves the view of a clearly engraved scale
• To operate, simply dial torque setting and insert bit
• Anti-backlash design enhances repeatability
• Comes with FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Kit includes Hex 1/4 to 1/4 Sq. Drive

STR 810597

Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

Product Description

• Adjust torque value by rotating the grip
• Grip lock makes locking in torque value fast, easy, and secure
• Tool changees from one end of the scale to the other with the fewest number of turns
• Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
• Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
• Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
• Flattened case prevents side loading during torque application or testing/calibration
• Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
• Ratchet is built for durability
• Ratchet replacement is fast and easy when needed
• All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
• Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory

STR 810673

STR 810674

STR 810712

Wireless Digital Torque Wrenches: TAC Digital Torque and Angle Wrench, in-lb

Product Description

• Keep up with the shortest of takt times
• Fully compatible with the Global 400, Global 400mp, and the TCV e2 torque controllers
• Works with the Patented Holding Tool when used with the Global 400 or Global 400mp
• Access to over 200 interchangeable heads that all fit on the end of the Pin and Spring Dovetail
• Heads "Lock On" to the Dovetail when the head is centered on the wrench
• Powered by one AAA NiMH rechargeable battery

STR 810715

Wireless Digital Torque Wrenches: TAC Digital Torque and Angle Wrench, in-lb

Product Description

• Keep up with the shortest of takt times
• Fully compatible with the Global 400, Global 400mp, and the TCV e2 torque controllers
• Works with the Patented Holding Tool when used with the Global 400 or Global 400mp
• Access to over 200 interchangeable heads that all fit on the end of the Pin and Spring Dovetail
• Heads "Lock On" to the Dovetail when the head is centered on the wrench
• Powered by one AAA NiMH rechargeable battery

STR 810721

Wireless Digital Torque Wrenches: TAC Digital Torque and Angle Wrench, in-lb

Product Description

• Keep up with the shortest of takt times
• Fully compatible with the Global 400, Global 400mp, and the TCV e2 torque controllers
• Works with the Patented Holding Tool when used with the Global 400 or Global 400mp
• Access to over 200 interchangeable heads that all fit on the end of the Pin and Spring Dovetail
• Heads "Lock On" to the Dovetail when the head is centered on the wrench
• Powered by one AAA NiMH rechargeable battery

STR 810760

Micrometer Adjustable Torque Wrenches: SD Series Micrometer Adjustable Click Wrenches, ft-lb

Product Description

• Torque value is adjusted by rotating the grip
• Our tools change from the top of the scale to the bottom in the fewest number of turns
• Grip lock makes locking in the torque value fast, easy, and secure
• Ball-bearing rock-over assembly assures smooth operation, enhances repeatability, and increases wrench service life
• Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Design provides a strong audible and tactile pulse when the set torque is achieved
• Flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
• Ratchet is built for durability
• Ratchet replacement is fast and easy when needed
• All tools up to 250 ft-lb, or 300 Nm, capacity come with a rugged, custom-molded plastic case
• Includes FREE tabulated calibration certificate.

STR 810772

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, ft-lb

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 810788

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, Nm

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 810794

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, Nm

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 10013

Torque Transducers: L Series

Product Description

• Built-in L-bracket for mounting perpendicular to your surface
• Requires detachable cable Part: 10293
• Mounting holes drilled for 5/16 bolts, 3.25 on center

STR 10011

Torque Transducers: L Series

Product Description

• Built-in L-bracket for mounting perpendicular to your surface
• Requires detachable cable Part: 10293
• Mounting holes drilled for 5/16 bolts, 3.25 on center

STR 10015

Torque Transducers: QC Series

Product Description

• Quick Connect System that can be mounted to ML 1000 and ML 2000 Mechanical Loader
• Removal of adapter plate permits use with ML 250 (250 ft. lbs. capacity and below)
• Detachable cable (Part No: 10293) is required for all transducers
• TT-QC 25IO, TT-QC 1000 and TT-QC 2000 include detachable cable (Part No: 10293)

STR 10293

Torque Tester Accessories: System 8 Digital Torque Tester Cables

Product Description

• Cables for System 8

STR 10612

Torque Controller Systems: Global 400 MP Torque Controller

Product Description

• Wireless error-proofing system that integrates hand tools into your MES
• Four (4) network connections house in one box
• These network connections, or interfaces, communicate with up to four operators working independently
• Comes with Global Manager Freeware
• Global Manager Freeware is used to set up parameters and jobs in each of the interfaces
• Parameter and job specifications can also be set up at the Global 400mp using the soft keypads
• Both key and password protected, this eliminates any inadvertent parameter or job changes made at the tool level
• Tools are matched with, or "Learned In" to an interface
• Each interface has its own network connection and communicates directly with the MES
• MES sends parameter and job selections to each interface
• There is robust communication between MES, Global 400mp, the operators, and the tools

STR 10474

STR 10654

Wireless Digital Torque Wrenches: 1250 Series Exacta 2 Digital Torque Wrench, ft-lb

Product Description

• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
• Torque and angle can identify changing joint conditions and prevent errors
• Backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application
• Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400m
• P-Sets are set and saved via the controller, no changes can be made at the wrench level
• Provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series
• Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models

STR 10656

Wireless Digital Torque Wrenches: 1250 Series Exacta 2 Digital Torque Wrench, ft-lb

Product Description

• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
• Torque and angle can identify changing joint conditions and prevent errors
• Backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application
• Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400m
• P-Sets are set and saved via the controller, no changes can be made at the wrench level
• Provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series
• Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models

STR 21431

STR 21480

STR 10021

STR 10180

STR 10277

STR 10278

STR 10279

STR 10280

STR 10337

STR 10339

STR 10442

STR 10466

STR 10499

STR 10515

STR 10551

STR 10555

STR 21992

STR 21781